Affiliate disclosure: some links above are affiliate links, which means Waymark may earn
a small commission if you buy through them, at no extra cost to you. We only recommend
supplies relevant to the job.
Tools for this job
The tools this project needs. Big-ticket tools are often cheaper to rent for a one-time job.
Some links above are affiliate links. Waymark may earn a small commission if you buy
through them, at no extra cost to you.
How to estimate sod for your project
Sod is sold by the roll and by the pallet, and each standard roll covers about 10 square feet. Measure the area you are turfing, add a small waste factor for trimming around curves and edges, and the calculator returns the rolls to order.
Sod is perishable, so order it to arrive the day you lay it and install it fast. A 5 percent waste allowance is usually enough since sod trims to fit, but round up to a full pallet if you are close to one.
Frequently asked questions
How many square feet does a roll of sod cover?
A standard sod roll covers about 10 square feet (often a 2 by 5 foot strip). A pallet typically covers 400 to 500 square feet. Set the roll coverage above if your supplier uses a different size.
How much extra sod should I order?
Add about 5 percent for trimming around curves, beds, and edges. Sod cuts easily so waste is low, but it is better to have an extra roll than to leave a bare strip.
You'll get the homeowner checklist plus a link to the free maintenance tracker that lays out your seasonal jobs and when each is due. Occasional useful emails, unsubscribe anytime.